OS/2 Warp
(version 4.0)
Abandonware


This is the retail package of OS/2 version 4.
OS/2 came with three installation diskettes, 
and a CD-ROM.  If you lost the diskettes, you 
could recreate them from images on the CD-ROM.  

I have created three self-extracting images of 
these diskettes labeled "Disk0" (Installation 
Diskette), "Disk1" (Diskette 1), and "Disk2" 
(Diskette 2).  I have also created an ISO image 
of the CD-ROM (OS2WARP4).  The diskette images 
are in the ZIP file "Install.zip", and the 
CD-ROM image in the ISO "OS2WARP4.ISO".

To install OS/2 you must have a 1.44 diskette 
drive installed as Drive A:.  Place the first 
diskette (Installation Diskette) into drive A:, 
and the CD-ROM into your CD drive.  When you 
reboot the machine, the installation disk will 
boot.  It will then ask you to switch to the 
second diskette (Diskette 1).  Finally, it will 
ask you to switch to the third diskette 
(Diskette 2).  At this time, assuming no hardware
errors were encountered (i.e., hardware too new 
for OS/2 to recognize), the installation will 
continue from the CD-ROM.  

-----

Also included with the retail package was the 
OS/2 Device Driver Pak, which contained all the 
extra device drivers not on the Installation CD, 
but which were available from the IBM website.  



	Diskette Images = Install.zip
	Installation CD = OS2WARP4.ISO
	
   Device Driver Pak (volume 1.05) = OS2DDPAK.ISO